点击图片查看原图
联系电话15753708096 山东省济宁市高新区黄金大道
设备基本配置及参数 TJ-HB15L
Technical Data for Blow Molding TJ-HB15L
1. 基本参数General Issues
1.1设备操作说明包括液压、气动、操作系统、冷却系统等
Machine operating manual including Hydraulic, Pneumatic, Assembly drawing, Cooling water.
1.2最大制品容积：15L
Max. volume of product: 15L
1.3设备重量：7 ton
Total weight 7ton
2. 开合模Clamping Unit
2.1合模装置为双拉杆结构，容模空间大且更换模具方便
Principle: bi-direction synchronous clamping device with double axis.
2.2直线导轨运动
Linear roller guidance horizontal
2.3锁模力：90KN
Clamping force: 90KN
2.4模板尺寸 H x W :380x 425 mm
Mold platens H x W : 380x 425 mm
2.5模板开距：230-620 mm
Distance between the platens: 230-620 mm
3. 模头Die Head
3.1连续挤出式结构模头
Type of die head: Continuous.
3.2先进先出
FIFO
3.3口模直径：Φ25-80mm
Die diameterΦ25-80 mm
3.4 300 点轴向壁厚控制
300 point WDS system controller
3.5热电偶类型：K
Type of temperature sensors: K
3.6模头加热功率：5.6 KW
Power of heating: 5.6 KW
4. 挤出系统 Extruder System
4.1适合加工原料：HDPE, PP
Extruder should be adequate to work with HDPE, PP
4.2螺杆直径：75mm
Screw diameter: 75mm
4.3螺杆长径比：25:1
Screw length diameter ratio: 25:1
4.4机筒、螺杆氮化处理
Nitride treatment barrel and screw.
4.5塑化量：80KG/H
Plasticizing efficiency: 80 kg/h (HDPE)
4.6进料段有冷却水套强制冷却
Feeding zone grooved with cooling water.
4.7热电偶类型：K
Type of temperature sensors: K
4.8挤出电机功率：22KW (AC)
AC motor drive: 22 KW
4.9铸铝加热器，加不锈钢外包
Cast-aluminum heater with heater preserving and protection cover of stainless steel.
4.10加热功率：11 KW
Heating power: 11 KW
4.11 4组风机冷却
Cooling by4 cooling fans.
4.12料斗有检测原料水平面视窗，料斗连接处有气动止位阀
Raw material hopper with a window.
